When white latex is used, it can be diluted with water according to different bonding targets. Warm water with 30-40°C is preferred for dilution. Cold water should not be used. When glueing wood, the amount of glue can be determined according to the specific use. Generally, The two adhesive surfaces are glued, bonded, placed for a moment, and then pressed for 3 hours with a pressure of 3 to 5 kg/cm2. At this time, the strength can reach about 70 to 80% of the adhesive strength. Curing takes 8 to 16 hours. If the method of heat curing is used, the curing time can be shortened, usually under a pressure of 3 to 5 kg/cm2, and the temperature is about 80°C. The thin plate only needs to be pressed for several minutes. The thick plate is appropriate. Extension of time.